Black Berkey Elements Remove:
VIRUSES
Exceeds purification standards:
MS2 – Fr Coliphage
PATHOGENIC BACTERIA CYSTS AND PARASITES
Exceeds purification standards:
E. coli – Klebsiella – Pseudomonas Aeruginosa – Giardia – Cryptosporidium – Raoultella Terrigena
TRIHALOMETHANES
Removed to below detectable limits:
Bromodichloromethane – Bromoform – Chloroform – Dibromochloromethane
Health effects: muscle & nervous system disorders, cancer
RADIOLOGICALS
Removed to below detectable limits:
Radon 222
INORGANIC MINERALS
Removed to below detectable limits:
| CONTAMINANT | HEALTH EFFECTS |
| Chlorine Residual | Cancer, Birth Defects |
| Volatile Organic Compounds (VOCs) Removed to below detectable limits |
|
| Alachlor Atrazine Benzene Carbofuran Carbon Tetrachloride Chlorine Chlorobenzene Chloroform 2,4-D DBCP p-Dichlorobenzene o-Dichlorobenzene 1, 1-Dichloroethane 1, 2-Dichloroethane 1, 1-Dichloroethylene cis-1, 2-Dichloroethylene Trans-1,2-Dichloroethylene 1, 2-Dichloropropane cis-l,3-Dichloropropylene Dinoseb Endrin Ethylbenzene |
Ethylene Dibromide (EDB) Heptachlor Heptachlor Epoxide Hexachlorobutodiene Hexachlorocyclopentadiene Lindane, Methoxychlor MTBE Pentachlorophenol Simazine Styrene 1,1,2,2-Tetrachloroethane Tetrachloroethylene Toluene 2,4,5-TP (Silvex) 1,2,4-trichlorobenzene 1,1,1-trichloroethane 1,1,2-trichloroethane Trichloroethylene o-Xylene m-Xylene p-Xylene |
| HEAVY METALS reduced by up to 95%: | |
| CONTAMINANT | HEALTH EFFECTS |
| Lead | kidney, nervous system damage |
| Mercury | kidney, nervous system disorders |
| Aluminum | respiratory, nervous system disorders |
| Cadmium | kidney damage |
| Chromium | liver, kidney, circulatory system disorders |
| Copper | gastro-enteric diseases |
About the Berkey® PF-2™ Fluoride and Arsenic Reduction Elements Set
Testing for fluoride was based on 20-30ppm of the ion in the influent aqueous solution at a flow rate of no more than 3 gpm per cubic foot of media. Results of ‹1ppm of the fluoride ion in the effluent were typical for the media (>95% reduction). Under optimum conditions, effluent concentrations of less than 50 ppb were readily achieved (>99.75% reduction).
Need to filter for arsenic? This product uniquely targets the entire family of arsenic oxide anions as well as the arsenic cations.
REPLACEMENT:
Under normal conditions it is recommended that each set of two PF-2 elements be replaced after 1,000 gallons (the Berkey Light®️ is 2.5 gallons therefore the PF-2 filters should be replaced after 400 refills. If the system is refilled about one time per day, the PF-2’s should be replaced annually, if the system is refilled about twice per day, the PF-2’s should be replaced about every six months). Actual capacity is dependent on the presence of other competing contaminants in the source water. High levels of Fluoride, arsenic and heavy metals may reduce the capacity and efficiency of the elements.
